Isometric preview; switch to top or 3D.
SOIC-8 · Generic package illustration
Based on the catalogue package field; not verified for this part. Check manufacturer documentation for dimensions, polarity and pinout.View part documentation ↓- Package
- SOP-8
Product overview
IVCT Gate Drivers IVCO1A02DR is a genuine original component suitable for circuit design and volume procurement. We supply full specifications, datasheets and flexible pricing, supporting both prototype and long-term supply.
- Manufacturer
- IVCT
- Part number
- IVCO1A02DR
- Category
- Gate Drivers
- Package
- SOP-8
- Condition
- New & Original
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
24 parametersConstruction
- VON VCC1 Rising threshold
- 2.2 V
- VOFF VCC1 Falling threshold
- 2.07 V
- VOFF thresholds VCC2 Falling threshold
- 7.9 V
- VON VCC2 Rising threshold
- 12 V
- VOFF VCC2 Falling threshold
- 0.8 V
Performance
- VCC1 Input supply voltage (reference to GND1)
- 7 V
- IN+, IN- Signal input voltage
- 1+0.3 V
- VCC2 Output supply voltage (reference to VEE2)
- 36 V
- OUTH, OUTL Gate driver output voltage
- 2+0.3 V
- OUT Gate driver output voltage
- 2+0.3 V
- CLAMP Miller Clamp input voltage
- 2+0.3
- TJ Junction temperature
- 150 °C
- TSTG Storage temperature
- 150 °C
- VCC1 Input supply voltage
- 5.5 V
- VINx Input voltage
- 0 V
- VCC2 IVCO1A01 output supply voltage
- 33 V
- VCC2 IVCO1A02 output supply voltage
- 33 V
- TA Ambient temperature
- 125 °C
- ICC1q VCC1 quiescent current IN+=0V, IN-=0V
- 0.8 mA
- ICC2q VCC2 quiescent current IN+=0V, IN-=0V
- 1.8 mA
- VON Under voltage VCC2 Rising threshold
- 8.4 V
- with external current limiting
- 8.5 A
- VOH Output high voltage IOUTH = -20mA
- 0.09 V
- VOL Output low voltage IOUTL = 20mA
- 8 mV
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.