FAN3224TMX
onsemi FAN3224TMX (power management - gate driver) is used for system regulation, battery charging and power conversion. Genuine products; electrical characteristics, pinout and package per the official datasheet. Contact us for pricing, samples and stock.
- Package
- WDFN-8
Product overview
onsemi FAN3224TMX (power management - gate driver) is used for system regulation, battery charging and power conversion. Genuine products; electrical characteristics, pinout and package per the official datasheet. Contact us for pricing, samples and stock.
- Manufacturer
- onsemi
- Part number
- FAN3224TMX
- Category
- Gate Drivers
- Package
- WDFN-8
- Packaging
- Tape & Reel
- Condition
- New & Original
- Compliance
- RoHS Compliant
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
35 parametersConstruction
- VDD VDD to
- 20.0 V
- VEN ENA and ENB to GND GND −
- 0.3 V
- VIN INA, INA+, INA–, INB, INB+ and INB– to GND GND −
- 0.3 V
- VOUT OUTA and OUTB to GND DC GND −
- 0.3 V
- VOUT OUTA and OUTB to
- 0
- VOUT OUTA and OUTB to GND Repetitive Pulse < 200 ns
- −2.0 V
- FAN3225C (Note 8)
- 0.21 mA
- VINL_T INx Logic LOW Threshold
- 1.2 V
- VINH_T INx Logic HIGH Threshold
- 1.6 V
- VINL_C INx Logic Low Threshold
- 38 VDD
- VINH_C INx Logic High Threshold
- 55 VDD
- VENL Enable Logic Low Threshold EN from 5 V to 0
- 1.2 V
- VENH Enable Logic High Threshold EN from 0 V to 5
- 1.6 V
- tD3 EN to Output Propagation 0 V to 5 V EN, 1 V/ns Slew Rate
- 17 ns
- tD4 5 V to 0 V EN, 1 V/ns Slew Rate
- 18 ns
- tRISE Output Rise Time (Note 12) CLOAD = 2200 pF
- 12 ns
- tFALL Output Fall Time (Note 12) CLOAD = 2200 pF
- 9 ns
Performance
- TL Lead Soldering Temperature (10 Seconds)
- +260 °C
- TJ Junction Temperature
- +150 °C
- TSTG Storage Temperature
- +150 °C
- VDD Supply Voltage Range
- 4
- TA Operating Ambient Temper
- +125
- VEN Enable Voltage ENA and
- 0 V
- VIN Input Voltage INA, INA+, INA–, INB, INB+ and INB
- 0 V
- TA Operating Ambient Temperature
- +125 °C
- VDD Operating Range
- 18.0 V
- IDD Supply Current, Inputs / All except FAN3225C
- 0.70 mA
- VON Turn−On Voltage INA = ENA = VDD, INB = ENB = 0
- 3.9 V
- VOFF Turn−Off Voltage INA = ENA = VDD, INB = ENB = 0
- 3.7 V
- VHYS_T TTL Logic Hysteresis Voltage
- 0.4 V
- IIN+ Non−Inverting Input Current IN from 0 to
- 175 mA
- IIN− Inverting Input Current IN from 0 to
- 1 mA
- VHYS_C CMOS Logic Hysteresis Voltage
- 17 VDD
- RPU Enable Pull−Up Resistance
- 100 kW
- IRVS Output Reverse Current
- 500 mA
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.