IR2113STRPBF
Infineon IR2113STRPBF (gate driver) is widely used for general-purpose circuit functions in consumer electronics, industrial control and communication equipment. Genuine original stock; operating voltage, power consumption and package are per the official Datasheet. Contact us for pricing, samples and available stock.
Isometric preview; switch to top or 3D.
SOIC-16 · Generic package illustration
Based on the catalogue package field; not verified for this part. Check manufacturer documentation for dimensions, polarity and pinout.View part documentation ↓- Package
- SOIC-16
Product overview
Infineon IR2113STRPBF (gate driver) is widely used for general-purpose circuit functions in consumer electronics, industrial control and communication equipment. Genuine original stock; operating voltage, power consumption and package are per the official Datasheet. Contact us for pricing, samples and available stock.
- Manufacturer
- Infineon
- Part number
- IR2113STRPBF
- Category
- Gate Drivers
- Package
- SOIC-16
- Condition
- New & Original
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
35 parametersConstruction
- VLO
- 0.3
- VDD
- 0.3
- TS
- 55
- TL
- 10 seconds)
- (IR2113)
- 625
- PD Package power dissipation @ TA ≤ +25°C (14 lead DIP)
- 1.6
- (16 lead SOIC)
- 1.25
- ton Turn-on propagation delay 7
- 12
- toff Turn-off propagation delay 8
- 94
- tsd Shutdown propagation delay 9
- 11
- tr Turn-on rise time 10
- 25 35
- tf Turn-off fall time 11
- 17 25
Performance
- VB High side floating supply voltage (IR2110)
- 525
- VCC Low side fixed supply voltage
- 25
- VLO Low side output voltage
- 0.3
- VDD Logic supply voltage
- 0.3
- dVs/dt Allowable offset supply voltage transient (figure 2)
- 50 V/ns
- RTHJA Thermal resistance, junction to ambient (14 lead DIP)
- 75
- TJ Junction temperature
- 150
- TS Storage temperature
- 150 °C
- TL Lead temperature (soldering, 10 seconds)
- 300
- VS High side floating supply offset voltage (IR2110)
- 500
- VSS Logic supply offset voltage -5
- 5
- TA Ambient temperature
- 125 °C
- VIH Logic “1” input voltage 12
- 9
- IQBS Quiescent VBS supply current 17
- 125
- IQCC Quiescent VCC supply current 18
- 180
- IQDD Quiescent VDD supply current 19
- 15
- IIN+ Logic “1” input bias current 20
- 20
- VBSUV+ VBS supply undervoltage positive going 22
- 8.6 9.7
- VBSUV- VBS supply undervoltage negative going 23
- 8.2 9.4
- VCCUV+ VCC supply undervoltage positive going 24
- 8.5 9.6
- VCCUV- VCC supply undervoltage negative going 25
- 8.2 9.4
- IO+ Output high short circuit pulsed current 26
- 2.5
- IO- Output low short circuit pulsed current 27
- 2.5
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.