Isometric preview; switch to top or 3D.
SOIC-16 · Generic package illustration
Based on the catalogue package field; not verified for this part. Check manufacturer documentation for dimensions, polarity and pinout.View part documentation ↓- Package
- SOIC-16
Product overview
TI AC-DC PWM Controllers UC3854BDW is a genuine original component suitable for circuit design and volume procurement. We supply full specifications, datasheets and flexible pricing, supporting both prototype and long-term supply.
- Manufacturer
- TI
- Part number
- UC3854BDW
- Category
- AC-DC PWM Controllers
- Package
- SOIC-16
- Condition
- New & Original
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
40 parametersConstruction
- VSENSE
- 11
- PKLMT
- 5
- 50% duty cycle
- 1.5
- Continuous
- 0.5
- Power dissipation
- 1 W
- Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001
- ±2500
- VCC turn-on threshold 1
- 16 V
- VCC turn-off threshold
- 10 V
- ENA threshold, rising
- 2.55 V
- ENA threshold hysteresis
- 0.25 V
- Input range (ISENSE, MULTOUT)
- 2.5 V
- 6 Submit Documentation Feedback Copyright © 1998
- 2016, Te ated
- VREF load regulation –10 mA < IREF < 0 mA
- 5 mV
- VREF line regulation 15 V < VCC < 35
- 2 mV
Performance
- Supply voltage
- 35 V
- Input Voltage ISENSE
- 11 V
- Input current RSET, IAC, PKLMT
- 10 mA
- Storage temperature, Tstg
- 150 °C
- VCC Supply voltage
- 20
- TJ Operating junction temperature
- 85 °C
- Supply current, OFF VENA = 0
- 1.5 mA
- Supply current
- 10 mA
- ENA input current VENA = 0
- 0.2 µA
- VRMS input current VRMS = 5
- 0.01 µA
- Voltage amplifier offset voltage VVAOUT = 5
- 8 mV
- VSENSE bias current –50
- 25 nA
- Voltage amplifier gain
- 100 dB
- Voltage amplifier output swing
- 5.8 V
- Voltage amplifier short circuit current VVAOUT = 0
- 20 mA
- SS current VSS = 2.5
- 14 µA
- Current amplifier offset voltage
- 4 mV
- ISENSE bias current –50
- 120 nA
- Current amplifier gain
- 110 dB
- Current amplifier output swing
- 16 V
- Current amplifier short-circuit current VCAOUT = 0
- 20 mA
- Reference output voltage IREF = 0 mA, TA = 25°C
- 7.5 V
- Reference output voltage IREF = 0 mA, over temperature
- 7.5 V
- VREF short circuit current VREF = 0
- 28 mA
- Multiplier out current zero IAC = 0 µA, RSET = 15 kΩ
- 0.2 µA
- Multiplier out current RSET limited
- 255 µA
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.