Isometric preview; switch to top or 3D.
SOT-23 · Generic package illustration
Based on the catalogue package field; not verified for this part. Check manufacturer documentation for dimensions, polarity and pinout.View part documentation ↓- Package
- SOT-23
Product overview
NXP Thyristors (SCR) PMV65XP is a genuine original component suitable for circuit design and volume procurement. We supply full specifications, datasheets and flexible pricing, supporting both prototype and long-term supply.
- Manufacturer
- NXP
- Part number
- PMV65XP
- Category
- Thyristors (SCR)
- Package
- SOT-23
- Condition
- New & Original
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
36 parametersConstruction
- 1 G gate
- 3 D
- 3 D drain 1
- 2
- VGS = -4.5 V; Tamb = 25 °C [1]
- 2.8 A
- VGS = -4.5 V; Tamb = 100 °C [1]
- 1.8 A
- Ptot total power dissipation Tamb = 25 °C [2]
- 480 mW
- Tsp = 25 °C
- 4165 mW
- 017aaa123
- 017aa
- from junction to [2]
- 125 K/W
- V(BR)DSS drain-source ID = -250 µA; VGS = 0 V; Tj = 25 °C
- 20
- Product data sheet 12 February 2013
- 5 / 14
- VDS = -20 V; VGS = 0 V; Tj = 150 °C
- 100 µA
- VGS = 12 V; VDS = 0 V; Tj = 25 °C
- 100 nA
- VGS = -4.5 V; ID = -2.8 A; Tj = 150 °C
- 82 mΩ
- VGS = -2.5 V; ID = -2.3 A; Tj = 25 °C
- 67 mΩ
- VGS = -1.8 V; ID = -1 A; Tj = 25 °C
- 87 mΩ
- gfs forward VDS = -10 V; ID = -2.8 A; Tj = 25 °C
- 15 S
- QGS gate-source charge Tj = 25 °C
- 1 nC
- QGD gate-drain charge
- 1.65 nC
- Ciss input capacitance VDS = -20 V; f = 1 MHz; VGS = 0 V;
- 744 pF
- Coss output capacitance Tj = 25 °C
- 65 pF
- Crss reverse transfer
- 53 pF
- tr rise time Tj = 25 °C; ID = -1
- 18 ns
- td(off) turn-off delay time
- 135 ns
- tf fall time
- 68 ns
- 017aaa841
- 017aa
Performance
- VDS drain-source voltage Tj = 25 °C
- 20 V
- VGS gate-source voltage
- 12 V
- ID drain current VGS = -4.5 V; Tsp = 25 °C
- 4.3 A
- Tj junction temperature
- 150 °C
- Tamb ambient temperature
- 150 °C
- Tstg storage temperature
- 150 °C
- IS source current Tsp = 25 °C
- 1.6 A
- Rth(j-a) thermal resistance in free air [1]
- 230 K/W
- Rth(j-sp) thermal resistance
- 25 K/W
- IGSS gate leakage current VGS = -12 V; VDS = 0 V; Tj = 25 °C
- 100 nA
- VSD source-drain voltage IS = -0.9 A; VGS = 0 V; Tj = 25 °C
- 0.8 V
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.