ISO3088DWR
The ISO3088 is a 5-V, half-duplex isolated RS-485/RS-422 transceiver providing basic isolation of 2.5-kVrms withstand voltage with 8 mm minimum creepage and clearance. It supports data rates up to 20 Mbps, has a common-mode transient immunity of at least 25 kV/us, and operates from -40°C to +85°C. It is used for isolated industrial fieldbus and long-distance communication.
- Package
- SOIC-16
Product overview
The ISO3088 is a 5-V, half-duplex isolated RS-485/RS-422 transceiver providing basic isolation of 2.5-kVrms withstand voltage with 8 mm minimum creepage and clearance. It supports data rates up to 20 Mbps, has a common-mode transient immunity of at least 25 kV/us, and operates from -40°C to +85°C. It is used for isolated industrial fieldbus and long-distance communication.
- Manufacturer
- TI
- Part number
- ISO3088DWR
- Category
- Isolation Devices
- Package
- SOIC-16
- Packaging
- Tape & Reel
- Condition
- New & Original
- Compliance
- RoHS Compliant
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
27 parametersConstruction
- VIT
- 115 mV
- Bus pins and
- ±6000 V
- V(ESD) Electros All pins
- ±4000 V
- Vhys Input hysteresis (VIT+ – VIT–)
- 30 mV
- IO(Z)
- 1 µA
Performance
- VCC (2) Supply voltage, VCC1
- 6 V
- VO Voltage at any bus I/O terminal
- 14 V
- VI Voltage input at any D, DE or RE terminal
- 6 V
- IO Receiver output current
- 10 mA
- TJ Junction temperature
- 150 ℃
- TSTG Storage temperature
- 150 ℃
- VCC1 Logic-side supply voltage
- 5.5 V
- VCC2 Bus-side supply voltage
- 5 V
- VOC Voltage at either bus I/O pin A
- 12 V
- VIH High-level input voltage (D, DE, RE inputs)
- 2 V
- VIL Low-level input voltage (D, DE, RE inputs)
- 0.8 V
- VID Differential input voltage, A with respect to
- 12 V
- RL Differential load resistance
- 60 Ω
- IO Output current, Driver
- 60 mA
- IO Output current, Receiver
- 8 mA
- TA Operating ambient temperature (ISO15 and ISO35)
- 85 °C
- IS Safety input, output, or supply current
- 286 mA
- TS Maximum safety temperature
- 150 °C
- VIT+ Positive-going input threshold voltage
- 85 mV
- High-level output voltage VID = 200 mV, IO = -8 mA, 5 V
- 4.8 V
- Low-level output voltage VID = –200 mV, IO = 8 mA, 3.3 V
- 0.15 V
- Low-level output voltage VID = –200 mV, IO = 8 mA, 5 V
- 0.15 V
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.