SG3525ADWR2G
onsemi SG3525ADWR2G (Power Management - AC/DC PWM Controller) is suitable for applications such as system regulation, battery charging and power conversion. Guaranteed genuine original; electrical characteristics and pin package are per the official Datasheet. Contact us for pricing, samples and stock availability.
Isometric preview; switch to top or 3D.
SOIC-16 · Generic package illustration
Based on the catalogue package field; not verified for this part. Check manufacturer documentation for dimensions, polarity and pinout.View part documentation ↓- Package
- SOIC-16W
Product overview
onsemi SG3525ADWR2G (Power Management - AC/DC PWM Controller) is suitable for applications such as system regulation, battery charging and power conversion. Guaranteed genuine original; electrical characteristics and pin package are per the official Datasheet. Contact us for pricing, samples and stock availability.
- Manufacturer
- onsemi
- Part number
- SG3525ADWR2G
- Category
- AC-DC PWM Controllers
- Package
- SOIC-16W
- Condition
- New & Original
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
42 parametersConstruction
- (Steady State)
- 0
- (Peak)
- 0
- Oscillator Frequency Range
- 0.1
- Oscillator Timing Resistor
- 2.0
- Oscillator Timing Capacitor
- 0.001
- Deadtime Resistor Range
- 0
- Oscillator Frequency Range fosc
- 400 kHz
- Oscillator Timing Capacitor CT 0
- 0.2 mF
- Line Regulation (+8.0 V VCC +35 V) Regline
- 10 mV
- Load Regulation (0 mA IL 20 mA) Regload
- 20 mV
- Long Term Stability (TJ = +125C) (Note 4)
- 20 V/khr
- Minimum Frequency (RT = 150 kW, CT = 0.2 mF) fmin
- 50 Hz
- Maximum Frequency (RT = 2.0 kW, CT = 1.0 nF) fmax
- 400 kHz
- Clock Amplitude
- 3.5 V
- Clock Width (TJ = +25C)
- 0.5 ms
- Sync Threshold
- 2.0 V
- DC Open Loop Gain (RL 10 MW)
- 75 dB
- Common Mode Rejection Ratio (+1.5 V VCM +5.2 V)
- 75 dB
- Power Supply Rejection Ratio (+8.0 V VCC +35 V)
- 60 dB
- Minimum Duty Cycle DCmin
- 0 %
Performance
- Supply Voltage
- +40 Vdc
- Collector Supply Voltage
- +40 Vdc
- Reference Output Current Iref
- 50 mA
- Oscillator Charging Current
- 5.0 mA
- Thermal Resistance, Junction−to−Air RqJA
- 100 C/W
- Thermal Resistance, Junction−to−Case RqJC
- 60 C/W
- Operating Junction Temperature
- +150 C
- Lead Temperature (Soldering, 10 seconds) TSolder
- +300 C
- Reference Load Current
- 0
- Operating Ambient Temperature Range
- 0
- Reference Load Current Iref
- 20 mA
- Reference Output Voltage (TJ = +25C) Vref 5
- 5.10 Vdc
- Temperature Stability DVref/DT
- 20 mV
- Short Circuit Current (Vref = 0 V, TJ = +25C)
- 80 mA
- Output Noise Voltage (10 Hz f 10 kHz, TJ = +25C) Vn
- 40 Vrms
- Current Mirror (IRT = 2.0 mA)
- 2.0 mA
- Sync Input Current (Sync Voltage = +3.5 V)
- 1.0 mA
- Input Offset Voltage
- 2.0 mV
- Input Bias Current
- 1.0 mA
- Input Offset Current
- 1.0 mA
- Low Level Output Voltage
- 0.2 V
- High Level Output Voltage
- 5.6 V
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.