TPS65262-1RHBR
The TPS65262-1 integrates three synchronous buck converters (3 A, 1 A, 1 A) from a 4.5 V to 18 V input with adjustable 0.6 V to 17 V outputs, plus two adjustable LDOs (350 mA and 150 mA). Features include power-good, soft-start, adjustable current limit, UVLO and light-load efficiency, operating from -40 C to 85 C. It is designed for multi-rail power in industrial and communication equipment.
- Package
- VQFN-32
Product overview
The TPS65262-1 integrates three synchronous buck converters (3 A, 1 A, 1 A) from a 4.5 V to 18 V input with adjustable 0.6 V to 17 V outputs, plus two adjustable LDOs (350 mA and 150 mA). Features include power-good, soft-start, adjustable current limit, UVLO and light-load efficiency, operating from -40 C to 85 C. It is designed for multi-rail power in industrial and communication equipment.
- Manufacturer
- TI
- Part number
- TPS65262-1RHBR
- Category
- Power Management
- Package
- VQFN-32
- Packaging
- Tape & Reel
- Condition
- New & Original
- Compliance
- RoHS & REACH Compliant
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
33 parametersConstruction
- VIN1, VIN2, VIN3
- 20
- LOUT1, LOUT2, LVIN1, LVIN2
- 7
- FB1, FB2, FB3, LFB1, LFB2, COMP1 , SS1
- 3.6
- AGND, PGND1, PGND2, PGND3
- 0.3
- Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)
- 2000
- VIN1, VIN2
- 18
- MODE, LEN1, LEN2, EN1, EN2, EN3, PGOOD
- 6.3
- FB1, FB2, FB3, LFB1, LFB2, COMP1
- 3
- LOUT1, LOUT2, LVIN1
- 5.5
- VIN rising
- 4.25 V
- Hysteresis
- 500 mV
- IDDQ_NSW
- 790 µA
- VCOMP = 1.2 V, TJ = 25°C 0
- 0.6 V
- VCOMP = 1.2 V, TJ = –40°C to 125°C 0
- 0.6 V
- VENXH
- 1.2 V
- ENx = 1
- 3.6
- ENx = 1.5
- 6.6
- TSS2/3 Buck2, buck3 soft-start time
- 1 ms
- TON_MIN Minimum on time
- 80 ns
- Gm_PS1/2/3 (1) ILX = 0.5
- 7.4 A/V
Performance
- LX1, LX2, LX3 (maximum withstand voltage transient <20 ns)
- 20
- Voltage MODE, LEN1, LEN2, EN1, EN2, EN3, PGOOD, V7V
- 7 V
- TJ Operating junction temperature
- 125 °C
- Tstg Storage temperature range
- 150 °C
- TA Operating ambient temperature
- 85 °C
- VIN Input voltage range
- 18 V
- UVLO VIN undervoltage lockout VIN falling
- 3.75 V
- V7V V7V LDO output voltage V7V load current = 0
- 6.3 V
- IOCP_V7V V7V LDO current limit
- 175 mA
- VENXL EN1, EN2, EN3 low-level input voltage
- 1.15 V
- IENhys Hysteresis current
- 3 µA
- ISS1 Buck1 soft-start charging current
- 5 µA
- ILIMIT1 Buck1 peak inductor current limit
- 5.1 A
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.