TJA1050T/CM,118
NXP Semiconductors TJA1050T/CM,118 (Interface) is suitable for communication scenarios such as UART, CAN, RS-485 and bus transceiving. Genuine original; speed, protocol compatibility and package are per the official Datasheet. Contact us for pricing and available stock.
Isometric preview; switch to top or 3D.
SOIC-8 · Generic package illustration
Based on the catalogue package field; not verified for this part. Check manufacturer documentation for dimensions, polarity and pinout.View part documentation ↓- Package
- SOIC-8
Product overview
NXP Semiconductors TJA1050T/CM,118 (Interface) is suitable for communication scenarios such as UART, CAN, RS-485 and bus transceiving. Genuine original; speed, protocol compatibility and package are per the official Datasheet. Contact us for pricing and available stock.
- Manufacturer
- NXP
- Part number
- TJA1050T/CM,118
- Category
- Interface
- Package
- SOIC-8
- Condition
- New & Original
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
35 parametersConstruction
- recessive; VTXD = VCC 2.5 5
- 10
- Ci input capacitance not tested − 5
- 10
- VTXD = VCC; recessive; −50 0
- +50
- recessive; VTXD = VCC 2.5
- 10
Performance
- VCC supply voltage 4
- 5.25 V
- Vi(dif)(bus) differential bus input voltage dominant 1
- 3 V
- Tvj virtual junction temperature −
- +150 °C
- VCC supply voltage −0
- 3
- VCANH DC voltage at pin CANH 0 < VCC < 5.25 V; −27
- 0
- VCANL DC voltage at pin CANL 0 < VCC < 5.25 V; −27
- 0
- VTXD DC voltage at pin TXD −0
- 3
- VRXD DC voltage at pin RXD −0
- 3
- Vref DC voltage at pin Vref −0
- 3
- VS DC voltage at pin S −0
- 3
- Vtrt(CANH) transient voltage at pin CANH note 1 −20
- 00
- Vtrt(CANL) transient voltage at pin CANL note 1 −20
- 00
- Vesd electrostatic discharge voltage at all pins note 2 −40
- 000
- Tstg storage temperature −55
- 50
- Tvj virtual junction temperature note 4 −40
- 50
- Rth(vj-a) thermal resistance from junction to in free air
- 145 K/W
- Rth(vj-s) thermal resistance from junction to in free air
- 50 K/W
- ICC supply current dominant; VTXD = 0 V 25 50
- 75
- VIL LOW-level input voltage output dominant −0.3 −
- +0.8
- IIH HIGH-level input current VTXD = VCC −5 0
- +5
- IIL LOW-level input current VTXD = 0 V −100 −200
- −300
- VIL LOW-level input voltage high-speed mode −0.3 −
- +0.8
- IIH HIGH-level input current VS = 2 V 20 30
- 50
- IIL LOW-level input current VS = 0.8 V 15 30
- 45
- IOH HIGH-level output current VRXD = 0.7VCC −2 −6
- −15
- IOL LOW-level output current VRXD = 0.45 V 2 8.5
- 20
- Vo(dom)(CANH) dominant output voltage at VTXD = 0 V 3.0 3.6
- 4.25
- Vo(dom)(CANL) dominant output voltage at VTXD = 0 V 0.5 1.4
- 1.75
- ICC supply current dominant; VTXD = 0 V 25
- 75
- VIL LOW-level input voltage output dominant −0.3
- +0
- IIH HIGH-level input current VTXD = VCC −5
- +5
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.