RS8524XQ
Runic RS8524XQ (operational amplifier) is designed for linear applications such as signal conditioning, sensor amplification and precision measurement. Genuine original stock; gain-bandwidth, noise and thermal drift are per the official Datasheet. Contact us for pricing, samples and available stock.
- Package
- MSOP-10
Product overview
Runic RS8524XQ (operational amplifier) is designed for linear applications such as signal conditioning, sensor amplification and precision measurement. Genuine original stock; gain-bandwidth, noise and thermal drift are per the official Datasheet. Contact us for pricing, samples and available stock.
- Manufacturer
- Runic
- Part number
- RS8524XQ
- Category
- Operational Amplifiers
- Package
- MSOP-10
- Packaging
- Reel
- Condition
- New & Original
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
40 parametersConstruction
- Supply, VS= (V+) - (V-)
- 7
- Signal output pin (3) (V-)
- 0.5
- Signal input pin
- 10 mA
- SOP8
- 110
- MSOP8
- 170
- TSSOP14
- 90
- DFN2X2-8
- 80
- Storage, Tstg
- 150
- Human-Body Model (HBM)
- ±5000
- Machine Model (MM)
- ±400
- Single-supply
- 5.5
- Dual-supply
- 2.75
- RS8521,RS852
- 2,RS8524
- Power-Supply Rejection Ratio PSRR VS= +2.3V to +5.5V, VCM= 0
- 130 dB
- Channel Separation, dc
- 0.1 μV/V
- Differential
- 1 pF
- Common-Mode
- 5 pF
- Slew Rate (8) SR G= +1
- 0.17 V/μs
- Gain-Bandwidth Product
- 350 KHz
- Overload Recovery Time tOR
- 6 μs
- RL=100 KΩ to
- 4.998
- RL=10 KΩ to
- 4.98
- RL=100 KΩ to V+
- 1
- RL=10 KΩ to V+
- 10
Performance
- Voltage Signal input pin (2) (V-)
- 0.5 V
- Current Signal output pin
- 55 mA
- Operating range
- 125
- Temperature Junction, TJ
- 150 °C
- Input Offset Voltage VOS VCM=
- ±1 μV
- Input Offset Voltage Average Drift Vos Tc
- ±0.005 μV/°C
- Input Bias Current (4) (5) IB VCM =
- ±10 pA
- Input Offset Current
- ±10 pA
- Input Voltage Noise enp-p f= 0.01Hz to 10Hz
- 3.2 μVpp
- Input Voltage Noise enp-p f= 0.01Hz to 1Hz
- 0.97 μVpp
- Input Voltage Noise Density en f= 1KHz
- 140 nV/√Hz
- Input Current Noise Density in f= 10Hz
- 15 fA/√Hz
- Open-Loop Voltage Gain
- 130 dB
- Short-Circuit Current (6)
- 25 mA
- Operating Voltage Range
- 5.5 V
- Quiescent Current/ Amplifier
- 60 μA
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.