NCV7356D1R2G
onsemi NCV7356D1R2G (Interface - Transceiver (CAN Transceiver)) is suitable for communication scenarios such as UART, CAN, RS-485 and bus transceivers. Genuine original; data rate, protocol compatibility and package are per the official Datasheet. Contact us for pricing and stock availability.
Isometric preview; switch to top or 3D.
SOIC-14 · Generic package illustration
Based on the catalogue package field; not verified for this part. Check manufacturer documentation for dimensions, polarity and pinout.View part documentation ↓- Package
- SOIC-14
Product overview
onsemi NCV7356D1R2G (Interface - Transceiver (CAN Transceiver)) is suitable for communication scenarios such as UART, CAN, RS-485 and bus transceivers. Genuine original; data rate, protocol compatibility and package are per the official Datasheet. Contact us for pricing and stock availability.
- Manufacturer
- onsemi
- Part number
- NCV7356D1R2G
- Category
- CAN Transceivers
- Package
- SOIC-14
- Condition
- New & Original
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
38 parametersConstruction
- ESD Capability of
- 000
- ESD Capability of Any Other
- 000
- Peak Reflow Soldering Tempera
- 60
- Jump Start; t < 1.0 min
- 27 V
- VBAT = 0
- −40
- ESD Capability of CANH VESDBUS Human Body Model −
- 4000 V
- ESD Capability of Any Other Pin VESD Human Body Model −
- 2000 V
- 5. ESD measured per Q100-002 (EIA/JESD2
- 2-A114-A)
- Paramete
- 1, Pad Board
- Junction-to-Lead (psi−JL7, YJL8) or
- 51 (Note 8)
- Junction-to-Ambient (RqJA, qJA)
- 187 (Note 7)
- Junction-to-Lead (psi−JL8, YJL8)
- 30 (Note 9)
- 7. 1 oz copper, 53 mm2 coper area, 0.06
- 2″ thick FR
- 8. 1 oz copper, 716 mm2 coper area, 0.0
- 62″ thick FR
- 9. 1 oz copper, 94 mm2 coper area, 0.06
- 2″ thick FR
- 10. 1 oz copper, 767 mm2 coper area, 0
- 062″ thick FR
- Parameter Min Pad Board
- 1, P
- Junction-to-Lead (psi−JL7, YJL8) or Pins 6−7 57 (Note 7)
- 51
- Junction-to-Ambient (RqJA, qJA) 187 (Note 7)
- 128
- Junction-to-Lead (psi−JL8, YJL8) 30 (Note 9)
- 30
- Junction-to-Ambient (RqJA, qJA) 122 (Note 9)
- 84
Performance
- Supply Voltage, Normal Operat
- 8
- Short-Term Supply Voltage, Tr
- 0
- CANH Voltage
- 27 V
- DC Voltage on Pin
- 0
- Maximum Latchup Free Current
- 00
- Storage Temperature
- 50
- Junction Temperature
- 50
- Supply Voltage, Normal Operation VBAT −
- 18 V
- Transient Supply Voltage VBAT.TR3 ISO 7637/1 Pulses 3A, 3B −
- 200 V
- CANH Voltage VCANH VBAT < 27
- −20 V
- Transient Bus Voltage VCANHTR1 ISO 7637/1 Pulse 1 (Note 4)
- −50 V
- Transient Bus Voltage VCANHTR2 ISO 7637/1 Pulses 2 (Note 4)
- 100 V
- DC Voltage on Pin LOAD VLOAD Via RT > 2.0 kW
- 40 V
- DC Voltage on Pins TxD, MODE1, MODE0, RxD VDC −
- 7.0 V
- Maximum Latchup Free Current at Any Pin ILATCH − −
- 500 mA
- Storage Temperature TSTG −
- 150 °C
- Junction Temperature TJ −
- 150 °C
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.