MCP1624-I/MC
Microchip Technology MCP1624-I/MC (DC-DC boost converter) suits system regulation, battery charging and power-conversion scenarios. Genuine original stock; electrical characteristics, pinout and package are per the official Datasheet. Contact us for pricing, samples and available stock.
Isometric preview; switch to top or 3D.
SOT-23 · Generic package illustration
Based on the catalogue package field; not verified for this part. Check manufacturer documentation for dimensions, polarity and pinout.View part documentation ↓- Package
- SOT-23
Product overview
Microchip Technology MCP1624-I/MC (DC-DC boost converter) suits system regulation, battery charging and power-conversion scenarios. Genuine original stock; electrical characteristics, pinout and package are per the official Datasheet. Contact us for pricing, samples and available stock.
- Manufacturer
- Microchip
- Part number
- MCP1624-I/MC
- Category
- DC-DC Converters (Boost)
- Package
- SOT-23
- Packaging
- Tape & Reel
- Condition
- New & Original
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
32 parametersConstruction
- NMOS Switch Leakage
- 0.3
- PMOS Switch Leakage
- 0.05
- VOUT%
- +7.4
- Line Regulation VOUT/
- 0.01
- Load Regulation VOUT/
- 0.01
- Maximum Duty Cycle
- 90 %
- Switching Frequency fSW
- 500 kHz
- EN Input Logic High
- 90
- EN Input Logic Low
- 20
- Soft Start Time tSS
- 750
- Thermal Shutdown Die
- 150 C
- Electrical Specifications: Unless otherwise indicat
- 1.2V, COUT
- Boldface specifications apply over the TA range of
- +85°C
Performance
- Minimum Start-Up Voltage
- 0.65 VNote
- Minimum Input Voltage after
- 0.35 VNote
- Output Voltage Adjust Range
- 5.5
- Maximum Output Current
- 50
- Feedback Voltage VFB 1
- 1.21 V
- Feedback Input Bias Current
- 10 pA
- Quiescent Current – PFM mode
- 19
- Quiescent Current – PWM mode
- 220
- Quiescent Current – Shutdown
- 0.7
- NMOS Switch ON Resistance RDS(ON)N
- 0.6
- PMOS Switch ON Resistance RDS(ON)P
- 0.9
- NMOS Peak Switch Current IN(MAX)
- 425 mANote
- EN Input Leakage Current
- 0.005 µAVEN=5V
- Die Temperature Hysteresis
- 10 C
- Operating Junction Temperature
- +125
- Storage Temperature Range
- +150 °C
- Maximum Junction Temperature
- +150
- Thermal Resistance, 6LD-SOT-23 JA
- 90.5 °C/W
- Thermal Resistance, 8LD-2x3 DFN JA
- 75 °C/W
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.