MAX1737EEI+
Analog Devices MAX1737EEI+ (battery charge-management IC (Li-ion charger controller)) is widely used for general circuit functions in consumer electronics, industrial control and communications equipment. Genuine parts; operating voltage, power consumption and package per the official datasheet. Contact us for pricing and stock.
- Package
- QSOP
Product overview
Analog Devices MAX1737EEI+ (battery charge-management IC (Li-ion charger controller)) is widely used for general circuit functions in consumer electronics, industrial control and communications equipment. Genuine parts; operating voltage, power consumption and package per the official datasheet. Contact us for pricing and stock.
- Manufacturer
- MAXIM
- Part number
- MAX1737EEI+
- Category
- Li-ion Battery Charger Controller ICs
- Package
- QSOP
- Packaging
- Tube
- Condition
- New & Original
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
39 parametersConstruction
- VBATT = 3V to 17V, CELL =
- 185
- VBATT < 2.4V per cell
- 5
- 6V < VCSSP < 28V, VISETIN =
- 5
- 6V < VCSSP < 28V, VCCS = 2V
- 90
- CCI Amplifier Transconductance VCCI = 2V
- 0.6
- CCS Amplifier Transconductance ISET = REF, VCCS = 2V
- 1.2
- TIMER1, TIMER2 Oscillation Frequency
- 2.1
- Prequalification Timer
- 6.25
- Fast-Charge Timer
- 81
- Full-Charge Timer
- 81
- VBATT = 3V to 17V, CELL = GND or
- 200 mV
- Top-Off Timer
- 40.5
- VADJ, ISETIN, ISETOUT VVADJ, VISETIN, VISETOUT =
- 0 or 4.2
- VADJ, ISETIN, ISETOUT VVADJ, VISETIN, VISETOUT = 0 or 4.2V
- 50
- REF Line Regulation 6V < VDCIN < 28V
- 6 mV
Performance
- DCIN Input Voltage Range
- 6
- DCIN Quiescent Supply Current 6
- 0V < VDC
- DCIN Quiescent Supply Current 6.0V < VDCIN < 28V
- 5 mA
- CS to BATT Current-Sense Voltage VISETOUT = VREF / 5
- 30
- CS to BATT Hard Current-Limit Voltage
- 355
- CSSP to CSSN Current-Sense Voltage
- 10
- CCI Amplifier Output Current VCS - VBATT = 0, 400mV
- ±100
- CCS Amplifier Output Current VCSSP - VCSSN = 0, 200mV
- ±100
- THM Trip-Threshold Voltage
- 1.386
- THM Low-Temperature Current VTHM = 1.4V
- 46.2
- THM High-Temperature Current VTHM = 1.4V
- 344
- THM COLD Threshold Resistance (Note 3)
- 26.92 28.70
- THM HOT Threshold Resistance (Note 3)
- 3.819 3.964
- BATT Undervoltage Threshold (Note 4)
- 2.4
- BATT Overvoltage Threshold (Note 5)
- 4.55
- BATT Recharge Voltage Threshold (Note 7)
- 94
- Temperature Measurement Frequency 1nF on TIMER1 and
- 0.98
- SHDN Input Voltage High
- 1.4
- SHDN Input Voltage Low (Note 8)
- 0.6
- SHDN Input Bias Current SHDN = GND or
- 1
- CELL Input Bias Current
- 5
- ISETOUT Voltage for ICHG = 0
- 150
- VL Output Voltage 6.0V < VDCIN < 28V
- 5.7 V
- REF Output Voltage 4
- 4.242 V
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.