LP2950CZ-3.3/NOPB
The LP2950 is a 100-mA LDO regulator rated for up to 30-V input with a typical quiescent current of 75 uA and about 110 mV dropout at full load. It offers fixed 3-V, 3.3-V and 5-V outputs with ±3% accuracy and operates from -40°C to +125°C. It is widely used in battery-powered and industrial supplies needing a simple, low-IQ regulator.
- Package
- TO-92-3
Product overview
The LP2950 is a 100-mA LDO regulator rated for up to 30-V input with a typical quiescent current of 75 uA and about 110 mV dropout at full load. It offers fixed 3-V, 3.3-V and 5-V outputs with ±3% accuracy and operates from -40°C to +125°C. It is widely used in battery-powered and industrial supplies needing a simple, low-IQ regulator.
- Manufacturer
- TI
- Part number
- LP2950CZ-3.3/NOPB
- Category
- Power Management
- Package
- TO-92-3
- Packaging
- Bulk
- Condition
- New & Original
- Compliance
- RoHS Compliant
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
35 parametersConstruction
- COUT Output capacitor
- 2.2 µF
- Output capacitor ESR (legacy chip)
- 5
- Output capacitor ESR (new chip)
- 2
- CIN Input capacitor
- 1 µF
- 25°C 3
- 3.3
- New chip 25°C 3.3
- 3.37 3.39 V
- DJ) 3.3
- 3.37 3.40 V
- 25°C 4
- 5
- 25°C
- 75
- IL = 100µA 25°C
- 78
- UVLO VIN rising
- 1.9
- UVLO VIN falling IL = 100µA New chip
- 1.8
- Hysteresis
- 100 mV
- Legacy chip
- 0.05
- New chip
- 0.05
- CL = 200µF Legacy chip
- 160
- 10Hz to 100kHz CL = 100µF New chip
- 250
- CL = 3.3µF, Legacy chip
- 100
- pins 1 and 7 New chip
- 100
- Power-supply ripple rejection New chip 25°C
- 80 dB
- 25°C 1
- 218
Performance
- Continuous input voltage (legacy chip)
- 35
- Continuous input voltage (new chip)
- 42
- VOUT Output voltage
- 30
- SHUTDOWN input voltage (legacy chip)
- 35
- SHUTDOWN input voltage (new chip)
- 42
- ERROR comparator output voltage (legacy chip) (2)
- 30 V
- ERROR comparator output voltage (new chip)(2)
- 39
- FEEDBACK input voltage (legacy chip)(2) (3)
- 30
- FEEDBACK input voltage (new chip)(2) (3)
- 5
- Tstg Storage temperature
- 150 °C
- VIN Input voltage
- 30
- VEN Enable voltage
- 30 V
- IL Output current
- 100 mA
- TJ Junction temperature
- 125 °C
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.