LMV342MAX
The LMV342 is a dual rail-to-rail input/output CMOS op-amp with 1MHz gain-bandwidth, 1V/us slew rate and a 4mV max offset voltage. It delivers up to 75mA output current, operates from a 2.5V to 5.5V supply across -40C to 125C, and is suited to low-voltage, high-output-drive applications.
- Package
- SOIC-8
Product overview
The LMV342 is a dual rail-to-rail input/output CMOS op-amp with 1MHz gain-bandwidth, 1V/us slew rate and a 4mV max offset voltage. It delivers up to 75mA output current, operates from a 2.5V to 5.5V supply across -40C to 125C, and is suited to low-voltage, high-output-drive applications.
- Manufacturer
- TI
- Part number
- LMV342MAX
- Category
- Amplifiers & Linear
- Package
- SOIC-8
- Packaging
- Tape & Reel
- Condition
- New & Original
- Compliance
- RoHS Compliant
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
35 parametersConstruction
- 25°C
- 4
- Full range
- 4.5
- αVIO Full range
- 1.7 V/°C
- 40°C to 125°C
- 3 nA
- 0 ≤ VICR ≤ 1.7V 25°C
- 56
- 0 ≤ VICR ≤ 1.6V Full range
- 50
- Lower range, CMRR ≥ 50dB 25°C
- 0
- Upper range, CMRR ≥ 50dB 25°C
- 1.7
- Output swing Full range
- 95
- (delta from supply rails) 25°C
- 30
- Sinking
- 15
- SR Slew rate RL = 10kΩ(3) 25°C
- 1 V/μs
- GBM Unity-gain bandwidth RL = 10kΩ, CL = 200pF 25°C
- 1 MHz
- Φm Phase margin RL = 100kΩ 25°C
- 72 °
- Gm Gain margin RL = 100kΩ 25°C
- 20 dB
- THD Total harmonic distortion 25°C
- 0.017%
- 0 ≤ VICR ≤ 4V 25°C
- 56
- 0 ≤ VICR ≤ 3.9V Full range
- 50
- Common-mode input Lower range, CMRR ≥ 50dB 25°C
- 0
- t(on) Amplifier turnon time 25°C
- 5 μs
- ON mode
- 2.7
- Shutdown mode
- 0.2
Performance
- V+ Supply voltage
- 5.5 V
- VID Differential input voltage
- ±5.5 V
- VI Input voltage (either input)
- 5.5 V
- VO Output voltage
- 0.3 V
- TJ Operating virtual junction temperature
- 150 °C
- Tstg Storage temperature
- 150 °C
- V+ Supply voltage (single-supply operation)
- 5.5 V
- TA Operating free-air temperature
- 125 °C
- IIB Input bias current –40°C to 85°C
- 250
- IIO Input offset current 25°C
- 6.6 fA
- Vn Equivalent input noise voltage f = 1kHz 25°C
- 40 V/√Hz
- In Equivalent input noise current f = 1kHz 25°C
- 0.001 A/√Hz
- voltage range Upper range, CMRR ≥ 50dB 25°C
- 4
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.