L293DNE
The L293D provides four independent half-H drivers for bidirectional DC motors or bipolar stepper motors, with a 36 V absolute-maximum supply and internal clamp diodes for inductive kickback protection. It is rated for 0 C to 70 C operation and is commonly used in hobby robotics and small motor-control applications where simple brushed-motor driving is required.
- Package
- PDIP-16
Product overview
The L293D provides four independent half-H drivers for bidirectional DC motors or bipolar stepper motors, with a 36 V absolute-maximum supply and internal clamp diodes for inductive kickback protection. It is rated for 0 C to 70 C operation and is commonly used in hobby robotics and small motor-control applications where simple brushed-motor driving is required.
- Manufacturer
- TI
- Part number
- L293DNE
- Category
- Motor Drivers
- Package
- PDIP-16
- Packaging
- Tube
- Condition
- New & Original
- Compliance
- RoHS & REACH Compliant
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
29 parametersConstruction
- VCC1
- 7
- VCC2
- 36
- VCC1 ≤ 7
- 2.3 V
- VCC1 ≥ 7
- 7 V
- EN
- 0.2
- All outputs at high level
- 13
- All outputs at low level
- 35
- Propagation delay time, low-to- L293NE
- 800
- high-level output from A input L293DWP, L293N
- 750
- Propagation delay time, high-to- L293NE
- 400
- low-level output from A input L293DWP, L293N
- 200
- L293NE, L293DNE See Figure 2
- 300
- output L293DWP, L293N
- 100
- Transition time, high-to-low-level L293NE
- 300
Performance
- Supply voltage, VCC1
- 36 V
- Output supply voltage
- 36 V
- Input voltage
- 7 V
- Output voltage
- + 3 V
- Peak output current, IO (nonrepetitive, t ≤ 5 ms)
- 2 A
- Peak output current, IO (nonrepetitive, t ≤ 100 µs)
- 1.2 A
- Continuous output current, IO
- 1 A
- Maximum junction temperature
- 150 °C
- Storage temperature, Tstg
- 150 °C
- VIL Low-level output voltage –0
- 1.5 V
- TA Operating free-air temperature
- 70 °C
- VOH High-level output voltage VCC2
- 1.4 V
- VOL Low-level output voltage
- 1.2 V
- VOKH High-level output clamp voltage L293D: IOK = –0.6
- + 1.3 V
- VOKL Low-level output clamp voltage L293D: IOK = 0.6
- 1.3 V
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.