Product overview
VISHAY MOSFETs IRFBE30PBF is a genuine original component suitable for circuit design and volume procurement. We supply full specifications, datasheets and flexible pricing, supporting both prototype and long-term supply.
- Manufacturer
- VISHAY
- Part number
- IRFBE30PBF
- Category
- MOSFETs
- Condition
- New & Original
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
33 parametersConstruction
- Linear derating factor
- 1.0 W/°C
- Single pulse avalanche energy b
- 260 mJ
- Repetitive avalanche energy a
- 13 mJ
- Maximum power dissipation TC = 25 °C
- 125 W
- Peak diode recovery dV/dt c dV/dt
- 2.0 V/ns
- Maximum junction-to-ambient RthJA
- 62
- Case-to-sink, flat, greased surface RthCS
- 0.50 °C/W
- Maximum junction-to-case (drain) RthJC
- 1.0
- Gate-source leakage IGSS VGS = ± 20
- ± 100 nA
- VDS = 800 V, VGS = 0
- 100
- VDS = 640 V, VGS = 0 V, TJ = 125 °C
- 500
- Forward transconductance gfs VDS = 100 V, ID = 2.5 A b
- 2.5 S
- Input capacitance Ciss VGS = 0 V
- 1300
- Output capacitance Coss VDS = 25 V
- 310 pF
- Reverse transfer capacitance Crss f = 1.0 MHz, see fig. 5
- 190
- Total gate charge Qg
- 78
- Gate-source charge Qgs VGS = 10
- 9.6 nC
- Gate-drain charge Qgd
- 45
- Turn-on delay time td(on)
- 12
- Rise time tr VDD = 400 V, ID = 4.1
- 33
- Fall time tf
- 30
- Internal drain inductance
- 4.5
- Internal source inductance LS die contact
- 7.5
- Body diode reverse recovery time trr
- 480 ns
- Body diode reverse recovery charge Qrr
- 1.8 μC
Performance
- Drain-source voltage
- 800
- Gate-source voltage
- ± 20
- Repetitive avalanche current a
- 4.1 A
- Soldering recommendations (peak temperature) d For 10 s
- 300
- Drain-source breakdown voltage VDS VGS = 0 V, ID = 250 μA
- 800 V
- Gate-source threshold voltage VGS(th) VDS = VGS, ID = 250 μA
- 4.0 V
- Gate input resistance Rg f = 1 MHz, open drain
- 1.6 Ω
- Body diode voltage VSD TJ = 25 °C, IS = 4.1 A, VGS = 0 V b
- 1.8 V
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
What is a drop-in replacement for IRFBE30PBF?
IRFBE30PBF is an N-channel 800 / 800 V MOSFET. A pin-to-pin compatible substitute must match three things: V_DS ≥ 800, R_DS(on) ≤ the original R_DS(on), and the identical original footprint. Always verify avalanche rating and gate charge (Q_g ≈ 78) against your driver before swapping.
How do I choose a MOSFET alternative?
Three checks: (1) V_DS must be ≥ original with ~20% headroom for spikes; (2) R_DS(on) should be ≤ original, evaluated at your real operating temperature; (3) package must be identical (TO-220 ≠ TO-263). Also confirm gate charge (Q_g) and avalanche energy match, or re-test the driver.
Which parameters matter most when comparing MOSFETs?
Focus on V_DS (voltage rating), I_D (continuous current at your case temperature, not just 25 °C), R_DS(on) (conduction loss), and Q_g (switching speed / driver match). For inductive loads, also check avalanche rating.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.