EL817S1(B)(TU)-F
Everlight EL817S1(B)(TU)-F (Optocoupler) is used for display indication, optocoupler isolation and optical communication. Genuine original; wavelength, luminous flux and package are per the official Datasheet. Contact us for pricing and available stock.
Isometric preview; switch to top or 3D.
DIP-4 · Generic package illustration
Based on the catalogue package field; not verified for this part. Check manufacturer documentation for dimensions, polarity and pinout.View part documentation ↓- Package
- DIP-4
Product overview
Everlight EL817S1(B)(TU)-F (Optocoupler) is used for display indication, optocoupler isolation and optical communication. Genuine original; wavelength, luminous flux and package are per the official Datasheet. Contact us for pricing and available stock.
- Manufacturer
- Everlight
- Part number
- EL817S1(B)(TU)-F
- Category
- Optocouplers
- Package
- DIP-4
- Packaging
- Tube
- Condition
- New & Original
- Compliance
- RoHS Compliant
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
23 parametersConstruction
- Input capacitance Cin
- 30
- ICEO
- 100
- BVCEO
- 35
- BVECO
- 6
- Transfer EL817C
- 400
- ratio
- 300
- VCE(sat)
- 0.1
- Floating capacitance
- 0.6
- Cut-off frequency fc
- 80 kHz
- Rise time tr
- 18
- Fall time tf
- 18
- Input
- 10%
- 5 Copyright © 2010, Everlight All Rights Reserved. Rele
- 6 Rev.20
- None Standard
- 100 units per tube
- M Wide lead bend (0.4 inch spacing)
- 100 units per tube
- S1 (TU) Surface mount lead form (low profil
- 2000 units per reel
- S1 (TD) Surface mount lead form (low profil
- 2000 units per reel
- S2 (TU) Surface mount lead form (low profil
- 2000 units per reel
- S2 (TD) Surface mount lead form (low profil
- 2000 units per reel
- 6 Copyright © 2010, Everlight All Rights Reserved. Rele
- 6 Rev.20
Performance
- Forward Voltage
- 1.2 VIF=20mA
- Reverse Current
- 10 µAVR=4V
- Isolation resistance RIO 5×
- 1010 Ω
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.