DS1624S+
Analog Devices DS1624S+ (digital temperature sensor (with EEPROM)) is used for industrial measurement, environmental monitoring and smart-terminal sensing. Genuine parts; range, accuracy and interface per the official datasheet. Contact us for pricing and stock.
Isometric preview; switch to top or 3D.
SOIC-8 · Generic package illustration
Based on the catalogue package field; not verified for this part. Check manufacturer documentation for dimensions, polarity and pinout.View part documentation ↓- Package
- SOIC-8
Product overview
Analog Devices DS1624S+ (digital temperature sensor (with EEPROM)) is used for industrial measurement, environmental monitoring and smart-terminal sensing. Genuine parts; range, accuracy and interface per the official datasheet. Contact us for pricing and stock.
- Manufacturer
- MAXIM
- Part number
- DS1624S+
- Category
- Digital Temperature Sensors (with EEPROM)
- Package
- SOIC-8
- Condition
- New & Original
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
34 parametersConstruction
- 0°C to +70°C
- ±0.5
- 55°C to +125°C
- ±2.0
- Thermometer Resolution 12-bit
- 0 °C
- tSP Fast mode
- 50 ns
- I/O Capacitance
- 10 pF
- Communication only
- 125
- EEPROM Write Cycle Time tWR 0°C to +70°C (Note 8)
- 50 ms
- 20°C to +70°C
- 20k Write
- EEPROM Data Retention tEEDR -40°C to +70°C
- 20 Years
- Fast mode
- 400
- Standard mode
- 100
- Bus Free Time Between a STOP Fast mode
- 1.3
- and START Condition Standard mode
- 4.7
- Hold Time (Repeated) Fast mode
- 0.6
- START Condition Standard mode
- 4.0
- Setup Time for a Repeated START Fast mode
- 0.6
- Condition Standard mode
- 4.7
- Fast mode (Notes 10, 11
- 100
- Standard mode 12)
- 250
- Rise Time of Both SDA and SCL Fast mode 2
- 300
- Signals Standard mode 2
- 1000
- Fall Time of Both SDA and SCL Fast mode 2
- 300
- Capacitive Load for Each Bus Line
- 400 pF
- Input Capacitance
- 5 pF
Performance
- Supply Voltage VDD (Note 2)
- 5.0 V
- Low-Level Input Voltage
- 0.3 x V V
- High-Level Input Voltage VIH 0
- 7 x VDD V
- VOL1 3mA sink current (Note 2)
- 0.4
- VOL2 6mA sink current (Note 2)
- 0.6
- Input Current Each I/O Pin 0.4 < VI/O < 0.9VDD (Note 4)
- +1 µA
- Temperature conversion
- 1250
- Active Supply Current ICC E2 write (Notes 5, 6)
- 400 µA
- Standby Supply Current ISTBY (Notes 5, 6, 7)
- 1 µA
- Temperature Conversion Time tTC
- 200 ms
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.