BTS50085-1TMA
Infineon BTS50085-1TMA (smart power switch) suits board-level interconnection, signal switching and power on/off scenarios. Genuine original stock; contact resistance, mechanical life and package are per the official Datasheet. Contact us for pricing, samples and available stock.
- Package
- TO-220-7
Product overview
Infineon BTS50085-1TMA (smart power switch) suits board-level interconnection, signal switching and power on/off scenarios. Genuine original stock; contact resistance, mechanical life and package are per the official Datasheet. Contact us for pricing, samples and available stock.
- Manufacturer
- Infineon
- Part number
- BTS50085-1TMA
- Category
- Smart Power Switches
- Package
- TO-220-7
- Packaging
- Tape & Reel
- Condition
- New & Original
- Compliance
- RoHS Compliant
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
35 parametersConstruction
- RI5) = 2 Ω, RL = 0.23 Ω, td = 200 ms, VLoad dump6)
- 80 V
- Power dissipation (DC), TC ≤ 25 °C Ptot
- 170 W
- Vbb = 12V, Tj,start = 150°C, TC = 150°C const
- 1.2 J
- Electrostatic discharge capability (ESD)
- 4.0 kV
- Infineon Technologies AG Page 2
- 2008-Jan-2 4
- junction - ambient (free air): RthJA
- 60
- SMD version, device on PCB 8)
- 33
- measurement circuit page 7) IL = 20 A, Tj = 25 °C: RON
- 7.2 mΩ
- VIN = 0, IL = 20 A, Tj = 150 °C
- 14.6
- Vbb =6V, IL =20A, Tj =150°C: RON(Static)
- 17
- Slew rate on 11) (10 to 30% VOUT ) dV/dton 1.0
- 1.5 V/µs
- Slew rate off 11) (70 to 40% VOUT ) -dV/dtoff 1.1
- 1.9 V/µs
- Infineon Technologies AG Page 3
- 2008-Jan- 24
- Ibb = 15 mA Tj = 25...+150°C: 70
- 72
- Infineon Technologies AG Page 4
- 2008-Jan -24
- (pin 4 to pins 1,2,6,7) VON(SC)
- 6 V
- Thermal hysteresis ∆Tjt
- 10 K
- Integrated resistor in Vbb line Tj = 25 C: Rbb 90
- 120 Ω
- Infineon Technologies AG Page 5
- 2008-Jan-2 4
- static on-condition, Tj =25°C: 11 400
- 13 000 14 600
- kILIS = IL : IIS,19 Tj =150°C: 11 000
- 13 000 14 200
- VON < 1.5 V ), IL = 20 A,Tj =-40°C: 11 000
- 13 000 16 000
- VIS <VOUT - 5 v, Tj =25°C: 11 000
- 13 000 15 000
- VbIN > 4.0 V Tj =150°C: 11 000
- 13 000 14 500
- IL = 4 A,Tj =-40°C: 9 000
- 13 000 22 000
Performance
- Supply voltage (over voltage protection see page 4) Vbb
- 62 V
- Supply voltage for full short circuit protection, Vbb
- 58 V
- Operating temperature range Tj -4
- 0 ...+150 °C
- Storage temperature range Tstg -5
- 5 ...+150
- Current through input pin (DC)
- +15 , -250 mA
- Current through current sense status pin (DC)
- +15 , -250
- Nominal load current (Tab to pins 1,2,6,7) IL(ISO) 38
- 44 A
- Under voltage shutdown 13)14) VbIN(u) 1.5
- 3.0 V
- at VOUT = Vbb - VON(CL) (e.g. over voltage) VON(CL) 62
- 65 V
- Current sense ratio, IL = 80 A,Tj =-40°C: kILIS 11 400
- 13 000 15 400
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.