AD8108ASTZ
Analog Devices AD8108ASTZ (video crosspoint switch (analog switch)) is used for signal conditioning, sensor amplification and precision measurement. Genuine parts; gain bandwidth, noise and temperature drift per the official datasheet. Contact us for pricing and stock.
- Package
- LQFP-80
Product overview
Analog Devices AD8108ASTZ (video crosspoint switch (analog switch)) is used for signal conditioning, sensor amplification and precision measurement. Genuine parts; gain bandwidth, noise and temperature drift per the official datasheet. Contact us for pricing and stock.
- Manufacturer
- ADI
- Part number
- AD8108ASTZ
- Category
- Video Crosspoint Switches (Analog Switches)
- Package
- LQFP-80
- Condition
- New & Original
- Compliance
- RoHS Compliant
- Lifecycle
- Confirm with manufacturer
- Lead time / MOQ
- Confirm with quotation
Technical parameters
30 parametersConstruction
- −3 dB Bandwidth 200 mV p-p, RL = 150 Ω
- 325/250
- 2 V p-p, RL = 150 Ω
- 140/160
- Propagation Delay 2 V p-p, RL = 150 Ω
- 5 ns
- Slew Rate 2 V Step, RL = 150 Ω
- 400/480 V/µs
- Settling Time 0.1%, 2 V Step, RL = 150 Ω
- 40
- Gain Flatness 0.05 dB, 200 mV p-p, RL = 150 Ω
- 60/50
- AVCC, outputs disabled
- 10 mA
- AVEE, outputs enabled, no load
- 33 mA
- AVEE, outputs disabled
- 10 mA
- DVCC
- 10 mA
- PSRR f = 100 kHz
- 73/78
- f = 1 MHz
- 55/58 dB
- Serial Data Setup Time t1
- 20 ns
- CLK Pulse Width t2
- 100 ns
- Serial Data Hold Time t3
- 20 ns
- CLK Pulse Separation, Serial Mode t4
- 100 ns
- CLK to UPDATE Delay t5
- 0 ns
- UPDATE Pulse Width t6
- 50 ns
- CLK to DATA OUT Valid, Serial Mode t7
- 180 ns
- Propagation Delay, UPDATE to Switch On or Off
- 8 ns
- Data Load Time, CLK = 5 MHz, Serial Mode
- 6.4 µs
- CLK, UPDATE Rise and Fall Times
- 100 ns
- RESET Time
- 200 ns
- Data Setup Time t1
- 20 ns
- Data Hold Time t3
- 20 ns
- CLK Pulse Separation t4
- 100 ns
Performance
- Supply Current AVCC, outputs enabled, no load
- 33 mA
- Supply Voltage Range
- ±4.5 to ±5.5 V
- Temperature Range Operating (still air)
- −40 to +85 °C
- θJA Operating (still air)
- 48 °C/W
Specifications & documentation
Use the official manufacturer documentation to verify electrical characteristics, package dimensions and operating limits before design approval.
Frequently asked questions
Common pre-quotation questions and selection notes to help you verify key parameters and sourcing before requesting a quote.
How do I verify the part is genuine / avoid counterfeit?
Buy only from authorized or franchised channels. On receipt, check: (1) laser-etched markings that solvent will not remove; (2) batch / lot code consistent between label and device; (3) original reel or tube packaging; (4) request traceability documents (CoC, date code). For critical parts, third-party X-ray / decapsulation testing is recommended.
How do I read the markings / date code on a chip?
Most active ICs use a 4-digit date code YYWW (year + week, e.g. 2345 = 2023 week 45). The top mark is manufacturer logo + base part number + lot code. For SMD code lookup, search by "marking code + package" on AllDataSheet / Octopart / LCSC.
What does the package code mean (TO-220, SOT-23, QFP…)?
Package codes describe the physical form factor and pin layout — critical when sourcing, because electrically equivalent parts in different packages will not fit the PCB. Common: TO-220 (3-terminal power), SOT-23 (3-pin small signal), DIP / SOIC (through-hole / SMD ICs), QFP / QFN (MCUs, processors).
What if my original model is discontinued (EOL / NRND)?
Three options: (1) the manufacturer’s recommended replacement; (2) franchised distributor legacy stock; (3) a functionally compatible cross-brand part — provided pinout and key parameters match. Always evaluate on a real board before mass swap.
What is the minimum order quantity (MOQ) and lead time?
We support both sample and volume orders. Minimum order quantity, stock availability and lead time are confirmed per inquiry — tell us your model and quantity and we will quote. Sample quantities for design validation are supported.
Can I get the datasheet and samples?
The full datasheet is linked on this page. For parts without a direct datasheet, we can locate the manufacturer document on request. Sample requests are supported — contact us with your model and quantity.
Request confirmation of current stock, date code, packaging, price and delivery terms. Product information does not constitute a binding offer; final specifications are confirmed with your quotation.